커피숍 인테리어 입선작업, 다운라이트 6인치 3인치 시공 #인테리어전기


Where to install downlight luminaires
I uploaded a video that punches in advance Today’s winning work to wire electric wires, CD cable The video shows the installation of 6 inch downlights and 3 inch downlights. For the sake of convenience, the CD conduit is simply called a pipe. Pipes are cut down more than perforations and spaces
Pipe passes through all perforations. At this time, except for the back position of the end point
The pipes must overlap (cross). So that the luminaire is powered up
The wiring can also be used to supply power to the next luminaire. By tying the pipes together
To prevent it from falling out. There are many ways to work,
I am comfortable with this method. The pipe length you see now is also short. If the pipe length is short, the person working is inconvenient,
Do not try to save material, let’s work long! You may not feel it because the perforation length is too short, but if the distance is far, the pipe moves, causing inconvenience to find in the ceiling. Now we’re working on putting the pipes first in every luminaire location. Keep the access door open. The power connection of the kitchen
In the luminaire at the starting point, All power joins will be made at the access door. Now insert the wires. As you can see in the video now, the jump continues and the wires have to pass before all the luminaires light up. That wire under the access door is the power connection point that will illuminate all the luminaires. Put the wires in all the pipes as the video now shows. Make sure you leave the length of the wires in place too! If the wires are short when you later cut and join again
Someone gets uncomfortable. When I save you, I save you
Don’t try to cherish the material too much! Please ~~ Bend the ends of the wires
Taping makes it easier to get into the pipe. Wow ~ The speed of work is so fast in the video. It’s not really that fast,
Do not be frustrated that they work slowly ^^ You can cut off the end of the wire
You can just skip straight. It’s their own way of working, and I’m working in a convenient way depending on the site or situation Once you have won, install the luminaire. First peel off the wire sheath with pliers Connect the luminaire (6 inches of downlight)
Align it with the perforated hole. When you put it in, you need to fold the spring on both sides so that it can be attached to the ceiling by the force of the spring. When stripping the wire
Do not damage the copper wire. Damage to the copper wires in the cladding will cause a short circuit, which will cause the luminaire not to light or cause secondary problems. If the connection is bad, you need to connect directly. After inserting, pull the wire again to see if it is missing or not. If it falls out easily,
Install well with electric tape. Let’s look at the workflow with video. Kitchen purchase light (downlight 6 inches 12 places) construction completed Here we will install a three-inch downlight. Do the pipe work as before. The pipes to be jumped off are tied with electrical tape. The farther away the pipe becomes, the more difficult it is to straighten the pipe so that the pipe comes out of the desired hole. One is three emissions.
In other words, three jump lines were collected. The working method is the same.
All three wires can be joined together. When the pipe work is done, win the line. The wires are jumped and connected to other places. That only one pipe came out
That part is the end. Cut the wire to the proper length! Take off the wire covering
Install a luminaire (3 inches of downlight). There was not enough luminaires on site.
So I left the end (three places) and installed. Then you can check whether the lamp is turned on. Now buy the light (3 inches of downlight)
Will power pipe work. Send the pipe to the kitchen door
At that point, both electric joins will be controlled. As you can see in the video, it’s hard to get the pipe to where you want it to be. The same light lines are separately taped and tied together. Cut the pipe length to an appropriate amount.
That way, the wires go in that much and the work is easy. Run the wires. Strip the wires and install the luminaire. Installed luminaires (3 inches of downlight)

Leave a Reply

Your email address will not be published. Required fields are marked *