3D펜으로 벽 수리하기

3D펜으로 벽 수리하기


Hello guys, my name is Sanago and I am a 3d pen artist. I often walk on this street Really pretty right? Not really This crack bothered me everytime So I decided to give it a little artist touch This is more than enough I used green filament which is nature- friendly Lets get rid of the dust You should’ve brushed your teeth better Are my young viewers out there brushing their teeth correctly? (side, side, front, front, back, back) While everyone is at work there’s a guy brushing a brick Which is me The workflow is simple as it gets First off, make a bridge with the filament Because filaments shrink as it cools down which makes a good horizontal support Don’t forget to make vertical support as well Be careful as the original frame could melt Fortunately, it is not a busy street so it wasn’t too difficult to- Stranger: What are you working on? Um.. with a 3d pen I… Stranger: So you are filling this up? Stranger: Filling this up? I’m trying to fill this empty space Stranger: Ah~~ Stranger: Are you making a youtube video? Stranger: I thought ‘Sanago’ was a girl No it is a dude it’s me Stranger: I saw you on Youtube Stranger: For real? (something like this?) Stranger: I’m subscribed to your channel Really? Stranger: *in awe* Stranger: You must be quite popular Stranger: So next time I come by it will be there right? Yeah I’ll just leave it there Well I assumed it wouldn’t be that difficult to work on it… But I appreciate people who recognized me The structure is hollow therefore the support has to be thicker than usual Now I set up the frames every 3mm First time working outside was really refreshing and personally, I found it really nice If you work the outside first, it is easier to fill the inside This took about 30 minutes Usually takes longer when I take breaks But this time I didn’t feel like taking breaks (it is hard to make a living) Looking good already Though I finished all sides anyways Filling it all up is nice but I personally find it more unique and structurally beautiful to just leave it without fillings for it was meant to appear nature-friendly, I did not color it note that I used PLA which is a bio-degradable plastic Hey wall There is no need to pay for it Come tell me when you are hurt again Adidas I’m so freakin cool

100 thoughts on “3D펜으로 벽 수리하기

  1. Вы все красавчики, кроме меня.
    Я начинающий ютубер, дайте мне пожалуйста советов.

  2. Если вам нравится бравл старс то вам ко мне я сегодня начал поддержите)

  3. 존나웃겨ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ소녀상에서 구독하고 여기서 알람설정했다ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ

  4. 말 진짜 재밌다 더빙 ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ

  5. 이 영상 업로드 되자마자 봤었는데 지금 다시 채널 들어와서 볼 영상 찾고 있었다가 조회수에 깜짝 놀랐,, 믿고보는 사나고님 이제 꽃길만 걸읍시다요 ㅠ

Leave a Reply

Your email address will not be published. Required fields are marked *