4 DIY Geometric Room Decor Ideas | DIY Geometric Sculptures, Geometric Wall Art & DIY Coaster

4 DIY Geometric Room Decor Ideas | DIY Geometric Sculptures, Geometric Wall Art & DIY Coaster


Hey whats up you guys? My name is Emily
and in this video I’m going to show you how to make two geometric sculptures, a geometric
heart wall art idea and a coaster. In the comments down below let me
know what you think about these DIYs and if you like this video give this video a thumbs
up and subscribe to see more videos like this. Let’s get on with the video! The first DIY I’m going to show you
how to make is this pyramid sculpture. You want to take a barbecue
stick and cut four sticks off of that barbecue stick that
measures to be 4 inches long and then you want to cut four more
sticks that measure to be 5 inches long. You can use wire
cutters to cut the stick. Now you want to take the 4 inch sticks and a glue
gun and you want to glue the sticks into a square. For the pyramid part of this sculpture,
you want to take two of the 5 inch sticks and glue one end of each stick to the corner
and at a angle that is diagonal from each other and then you want to glue
the other ends of them together. Then repeat that again with the
other two sticks to create a pyramid. Now you want to put some more
glue on each end of the pyramid so it helps keep the sculpture together and it will
look like its all one piece when its all together. The last thing you have to
do is to paint the sculpture. You can paint the sculpture
with acrylic paint or spray paint. You can put anything you want inside of the
pyramid sculpture like a flower or a bowl. The next DIY I’m going to show you how to
make is this geometric heart wall art idea. For this DIY you will need two or more colors
of cardstock paper or scrapbook paper, a piece of white paper or
another color for the background, scissors, a binder clip or a picture
frame, a ruler, a pencil, and a glue stick. If you are only using two colors of paper like
me, you want to cut five 2 inch squares out of each color of the paper
you are using for the heart. If you are using more colors than me then
cut out as many squares that you will need and you can trace the
squares to make identical square. Now you want to cut each of the squares
diagonally in half to make triangles. Then you want to lay the triangles out
to form a heart onto the piece of paper you are going to use as the background.
I used a white piece of paper. Then you have to glue the triangles
onto the paper with a glue stick. The last thing you have to do is to put
the geometric heart into a picture frame or put a binder clip onto the
paper to hang the picture up. The third DIY I’m going to show you how
to make is this diamond shaped sculpture. You can use barbecue sticks for this sculpture
or you can use lollipop sticks like I did. You want to cut five sticks to 3 inches, fifteen
sticks to 2 inches, and five more sticks to 4 inches. Since the lollipop sticks that I
have are slightly under 4 inches, mine will be a little bit shorter but you can play around with the size of
the diamond sculpture to make any size. You want to take the five 3 inch sticks and glue
them together to form a pentagon with a glue gun. Then you want to take two of the 4 inch sticks and glue
each end into a corner of the pentagon at a angle. Then glue the other ends together. All you have to do is repeat the same steps
until you get a pyramid with a pentagon base. Now you want to take two of the 2 inch sticks and
glue each end to the bottom of one of the triangles and then you want to glue the other
ends of the sticks to form a triangle. Then you want to glue
another triangle next to that one and now you want to glue a stick
to the tops of those two triangles so there will be another triangle
between them and they will be connected. Now all you have to do is to follow the steps for the rest
of the 2 inch sticks the same way as the triangles. After you glue all of the sticks
together you want to add more glue into each corner of the
sculpture to help keep it together. Then all you have to do is paint the
sculpture with acrylic paint or spray paint. If you want you can put anything under
the diamond like a flower or a candle. For the last DIY I will show
you how to make this coaster. The first thing you want to do is to measure
out a 4 inch square template out of paper. Then you want to roll
out some polymer clay and then you want to trace
the template onto the clay and trim the extra clay off
with a knife used for clay. Then you want to bake the coaster
by following the clay instructions. When the coaster has cooled down you
can paint anything that you want onto it. I decided to paint a white
diagonal triangle onto it. When the paint has dried you can
put Mod Podge onto it to protect it. You might want to use your
finger instead of a paintbrush because you will probably see
the brush strokes when it’s dry. and that’s it for this video! In the comments
down below let me know what you think about these DIYs and if you like
this video give this video a thumbs up and subscribe to see more videos like this. I will see you in the next video. Bye!

5 thoughts on “4 DIY Geometric Room Decor Ideas | DIY Geometric Sculptures, Geometric Wall Art & DIY Coaster

  1. Wow!!! Amazing. Well done!!! ๐Ÿค—๐ŸŒธ๐ŸŒธI also make videos on youtube. You can check it If you want. ๐Ÿ˜Š๐Ÿ˜Š๐Ÿ˜Š

Leave a Reply

Your email address will not be published. Required fields are marked *