DECOUPAGE DIY – ROMANTIC VINTAGE TRAY


Sand all surface of the tray KL0013 by sandpaper. Paint the tray with white acrylic paint C0200. Apply a Spray adhesive CAD9721 onto the stencil K182 and fix it to surface. Apply the texture paste 704444 using the stencil. Remove the stencil. Cut an image out of the rice paper 45512. Rice paper AistCraft design © Glue the image on the tray with glue Cplus. After drying apply water based varnish KADL1 or 3219. Mix the acrylic paints white C0200 and beige C9084 and paint the tray. After drying apply water based varnish KADL1 or 3219. Mix Patina Antique Powder C700 and C709. Apply patina onto the borders of the tray. Rub down by cotton pad to remove excesses of patina. Use a humid cotton pad to remove excesses of patina. After drying apply water based varnish KADL1 or 3219. Mix Epoxy resin 0C100 (36 ml of component A + 21 ml of component B) in jar. Mix well and leave for 30 minutes in a jar so that the resin thickens a little. Pour out Epoxy resin onto the bottom of the tray. Dry it 24-48 hours. Fix the hook, tie the tape and you can hang it on the wall. Thank You!

Leave a Reply

Your email address will not be published. Required fields are marked *