DIY EASY Necklace & Bracelet Holder | ROOM DECOR | ANN LE


(cheerful music with vocalizing) – Bonjour! Comment ça va? How’s it going, everyone? So, for today’s video,
I am going to continue my bedroom decor series. I plan on making a new
bedroom DIY once every month, so, for this one, I’m going
to show you how to make a few jewelry stands, and
these are great to organize your necklaces and your bracelets. I’m going to show you
how to make two designs. One is inspired by the springtime, so if you want to give your
room a spring makeover, this is perfect for that. The second design is just
great to have all year round. It’s very simple and chic. And these are things
that I found from home and also my local thrift store. So I think that you guys are
going to have fun making this, and let’s get started! Let’s go down the list of
materials you will need for this project. There are two ways to make this, one using wooden dowels and the other using a paper towel roll. For the base of the jewelry stand, I will be using some candle holders. I found these from my local thrift store, and they usually have these
for a really good deal. For the rack, you can use
wooden dowels that can be found at your craft store or a
paper towel roll and magazine. Other supplies you will
need on hand are either a high temperature glue gun or E6000. For the wooden jewelry holder, you will need primer and
paint to cover up the work, and then if you are using
the paper towel roll option, you will need fabric or either
vinyl to cover the cardboard. Let’s start with the
wooden dowel’s method. Making this is super easy. All you have to do is find
the center of the dowel with the ruler and pen. Then mark the center. Next, apply permanent glue to the top of the candle base. Use the center point you made on the dowel to help guide you where to
place the dowel onto the base. Let the glue set for a good 30
minutes or so before priming. Once the glue cures,
go over it with primer, and then once the primer is set and dry, go over it with paint. After a full day of
waiting for this to dry, it’s now time to decorate it with some spring theme decoration. I found these cute birdies
from Michaels craft store just like the candle jar tutorial. Do you guys remember that tutorial? I love it. And since the base of this
is bigger than my dowel, I thought about using and gluing on some fake flowers to hide that. I just love how this turned out. It looks so springy, almost
like a rose garden theme. To make the design using
the paper towel roll method, take out your fabric or vinyl of choice. Then measure out how much
material you will need to use in order to wrap it around
your paper towel roll. Use your ruler for accurate
lines and measurement. (light guitar music) So here I have a rectangle
that I will be cutting out and with a glue gun glue the
wrong side onto the paper roll. Wrap the vinyl fully around the roll and glue the end seam together. To make the paper towel roll
more sturdy and durable, I suggest for you to take
a magazine, roll it up, and insert it inside the tube. Next, take the end of
the roll you just wrapped and trace it onto the vinyl. Make a set of end caps and cut it out. Glue each one to each end, and then, lastly, the
glue the vinyl roll onto the candle stick base. (light guitar music) I am so in love with how
all these turned out. Let me know which one
you will be recreating, and if you are, then
don’t forget to tag me on Twitter, Facebook, or Instagram. I will talk to you next week. Ciao! (light guitar music)

Leave a Reply

Your email address will not be published. Required fields are marked *