How to Get Rid of Mold | The Home Depot

How to Get Rid of Mold | The Home Depot


Almost all homes will have some mold
spores. These spores need little more than a food source and moisture to grow
on various surfaces in your home. The key is to remove mold before it spreads and
becomes a bigger problem. Left unchecked, it can rot wood surfaces
and cause indoor pollutants that can lead to health issues. Before you get rid of the mold, you’ll need to eliminate any moisture issues at the source. Indoors,
repair any plumbing leaks and install exhaust fans in bathrooms, the kitchen
and laundry room. Be sure your gutters and downspouts are
clear and that water is properly draining away from your home’s
foundation. Running a dehumidifier to reduce the overall moisture level in
your home can also keep mold from growing. Before getting rid of mold
buildup, always wear protective clothing, rubber gloves, a mask and goggles. Mold
gives off microscopic spores that can come in contact with your eyes, skin and
be inhaled. Hard surfaces such as tile, window sills, and cabinets can be cleaned
with detergent then dried completely with a rag.
There are detergents specially formulated with mold-killing ingredients
that can help speed the job. Just follow the manufacturer’s instructions for the
proper application. When done, dispose of the rags in a sealed garbage bag, and
immediately wash your clothes in a separate laundry load. For more porous
surfaces, like drywall, use a rag so you don’t damage the surface with more
abrasive cleaners. You can also create an effective mold killing solution with
some common household items. Undiluted white vinegar can be sprayed onto hard
surfaces in kitchens and baths. A bleach solution is also an option. Dilute the
bleach with water as directed by the manufacturer. Ammonia also works. Mix a
50/50 solution and spray on the surface. Wait 2 to 3 hours and rinse. However,
never mix ammonia with bleach or other cleaning products. This will create toxic
and dangerous fumes. On exterior surfaces you can apply a 1:10 solution of
bleach and water to the surface. Allow 10 to 20 minutes and rinse with a garden
hose. Another option is to mix a TSP solution
according to the product’s instructions and scrub the area with a stiff bristled
brush and rinse. If you have a large exterior mold area, use a pressure washer
to speed the job. For more detailed information about this and many other
projects, check out the DIY projects and ideas section of homedepot.com,
or talk to one of our store associates.

Leave a Reply

Your email address will not be published. Required fields are marked *