HOW TO INSTALL A BATHROOM SINK SECRET TIPS & TRICKS!

HOW TO INSTALL A BATHROOM SINK SECRET TIPS & TRICKS!


Hello my friends! Its Bahaino here with Bahaino Reno in the half duplex In this video I am going to show you how to install an under mount bathroom sink. A few things that I will be using. I have
some glue, fast drying glue. We have a piece of a two-by-four clamp and a few cardboard papers and a
sink. I have my lovely cloth here, some hand cleaner for paint. This product
is paint remover for hands, so it’s not very strong so it will not damage the
countertop or any other stuff. Okay, lets start by by cleaning up a little bit. The other thing that is
important, underneath, there is usually some dust from the cut this is important that
is a we have it really clean. You can see we use one side of the cloth to
clean the top. I just try to use the other end of it to clean underneath
because I’m just not want it to be like contaminated and this is nice and clean. Because if you leave dust etc. and then you put the silicon on it and then it will just start to
show mold underneath the silicon. Its just a regular rectangular sink. In the same way I’m just
gonna clean this and try to remove as much dust as I can. make sure that its gonna hold underneath
the the sink because some people have already asked for help because the sink loosened up and collapsed after a year or two that people installed it
so I gonna show you guys what I do that way I don’t have a call back
just keep watching.This one here just comes off is gonna leave it out for
now. Here we go we have it all here. I’m just gonna set it up underneath there for now. Give me some space and what I do here
just put some paper in there. I put my piece of 2×4 right on it, and
then I use this other paper to clean up some mess that is coming up that I don’t
need on my way. now here, Im just gunna use this clamp. Pretty much any clamp will do. I’m just gonna remove it from there. What I am
doing here just so you guys can see. I’ll just put
this back. slide this guy up, this clamp is pretty good. Usually I put the glue on right away, but if your new to this, it is very important to test it. This counter is very tight. I’m gonna
show you guys 2 more that we have done that are not as tight as this one, where we have plenty of
space to work, but usually I like to show on the video, the one that gives a little bit of
trouble. I’ll show you guys the other ones they are pretty easy just nothing on the way, and a lot of space to work. Now what I’m gonna do here is I’m just gonna use the glue, and going to put enough glue to hold it on and once I have it set
and dry, I put some more glue on within the sides of it. This is enough glue to hold it, but Ill put
some silicone and some other stuff once have this one dried up just to make
sure its not gonna go down. Alright here we go again. I’m just gonna make sure all the sides look
more or less the same and then Im just going to tight this guy up. Tighten it up until it is firm. Still can slide it a little bit. Let me hope that the plywood is not going to
be on my way. Just gonna take a peek underneath to see if anything is on the way. I’m just looking to see if both sides are more or less the same. There you go guys. This is how its set. Okay this one is
done in there, now I’m just gonna leave it there until tomorrow, but you guys
come with me. I did the one yesterday I’m just going to remove the clamp and
show you guys, just come to this other bathroom. Like I mentioned to you guys,
you guys can see the difference on this one, this one is pretty spacious with nothing on the way the other one was a little bit harder. This
one was done yesterday so as you can see is a different type of clamp. I’m just
gonna remove it that way this video is complete. There you go, take it down. There it is, sink is installed and I’m just
gonna clean this up put some silicone on there and it will be good to go. I hope
you guys can see right underneath the sink. You see, once I had it up
I just put some extra glue just to make sure it gonna be on place. Thank you very
much guys for watching this video See you soon in the next video and please subscribe
to see more videos like this one. I love you guys.

One thought on “HOW TO INSTALL A BATHROOM SINK SECRET TIPS & TRICKS!

Leave a Reply

Your email address will not be published. Required fields are marked *