How to Mount Your Style Tile Set Without a Frame | PBteen

How to Mount Your Style Tile Set Without a Frame | PBteen

{fonttblf0fswissfcharset0 Helvetica;} {colortbl;red255green255blue255;}
margl1440margr1440vieww20920viewh20020viewkind0 pardtx720tx1440tx2160tx2880tx3600tx4320tx5040tx5760tx6480tx7200tx7920tx8640qlqnaturalpardirnatural f0fs44 cf0 0:00:00.000,0:00:07.020
Style Tiles and Frame.
0:00:07.020,0:00:14.270 You’ve ordered and received your perfect style
tile set and you are ready to get creative.
0:00:14.270,0:00:27.080 Each box contains the hardware needed for
that tile. First find a wall that is the perfect size for your set. And measure just where
you want to hang your style tiles.
0:00:27.080,0:00:40.060 With your tape measure, pencil and level.
Mark where the top of your set will be and where the top left tile will start.
From there measure eight inches to the right and mark with your pencil. This is where your
first bracket will be placed.
0:00:40.060,0:00:46.130 Measure another sixteen inches to the right
for each additional tile’s bracket placement.
0:00:46.130,0:00:56.250 Position the top of each bracket at the mark
position and use a pencil to mark the wall through each of the two counter sunk holes
of the bracket as shown.
0:00:56.250,0:01:04.240 Now its time to install your brackets. Screw
an anchor into the wall at each bracket hole pencil mark made during the previous step.
Each anchor must be installed flush to the wall surface. Use the supplied screws to secure
each bracket to the wall at the anchors. Use two anchors and two screws for each top bracket
as shown.
0:01:18.010,0:01:27.060 Now its time to hang your first tile. You
need to place two additional brackets on the bottom and side magnets of your tile.
To hang your tile, center the tile on the top of mounted brackets so that the tile covers
the bracket as shown.
0:01:35.020,0:01:51.000 Repeat this step for the remainder of the
top row, making sure the second and third tile snap into the previous tile side bracket.
Gently slide and adjust tiles as needed so that they hang flush with one another.
Note that the last tile on the top row will only need a bracket placed on the lower magnet
of the tile.
0:01:57.010,0:02:04.100 To begin on the second row of tiles, mark
the wall through right side screw hole of the bracket at the base of the above tile.
Next slide the bracket to the left so you can screw in one anchor at this marked location.
Once the anchor is in slide the bracket back to its correct spot and use one screw to secure
the bracket to the anchor.
0:02:16.100,0:02:20.060 Keep adding style tiles to the middle rows
by repeating these steps.
0:02:20.060,0:02:23.030 Now you’re ready to hang your last row of
0:02:23.030,0:02:28.060 Take your tape measure and measure down 15’be
inches from the above tile.
0:02:28.060,0:02:34.260 At that mark place your bracket in reverse
position as shown and mark to counter sunk holes with your pencil.
Remove the bracket and screw in the anchors at the pencil marks.
Next secure the bracket to the wall with these screws.
Repeat this step for the remaining tiles in the bottom row. Next place an additional bracket
on the side magnet of your tile and hang the tile on the wall mounted brackets.
Complete this step until you have completed the bottom row of tiles
Now your set is complete and ready for you to use and enjoy.


One thought on “How to Mount Your Style Tile Set Without a Frame | PBteen

Leave a Reply

Your email address will not be published. Required fields are marked *