Modern Collage Art Quilt

Modern Collage Art Quilt


Welcome to SewVeryEasy, my name is Laura. And do you have any of that fabric that’s just too pretty to cut up? Well, I have a project that can showcase that fabric and you will leave it in big pieces. When you are done you are going to have a beautiful quilt because we’re going to treat that fabric as art pieces, like a piece of art that you would put on your wall. However, this is a quilt, and it takes nice big pieces. I’m going to start with six fat quarters, and you might need a little bit of extra fabric just to fill in some little spots. With your big pieces of fabric, just straighten them up and make sure all of the edges are straight. It doesn’t have to be square; they can be rectangular. These are 17″ by 22″ because that’s what the fat quarters squared up to be. This is a little bit shorter than 17″ by 22″, but as long as all the edges are nice and square, that’s all you’ll need to do to start. Now we’re going to consider this art and this is going to be wall art. Your surface is going to be the wall. If you can get a big flat surface, this will definitely help. If you can get a large mat or put a couple of mats together, it’ll save your surface from your pins. Now we’re going to take these large pieces, put them on the wall, and we’re going to overlap them, filling a very big space. The first thing I’m going to do is take the piece of art that I like best. It will be in the middle of where all of the wall art is going to be. Then I will place my second piece. From there, I’m able to place the pieces of fabric, overlapping and underlapping, until I have all of the pieces the way I want them. Now just keep overlapping/underlapping. Stick some in, stick some on the outside. You just need to have your entire surface covered. And you can follow your cut lines to keep the pattern straight. And you just need to fill up the entire surface. If there is a place that is left blank, you will need to fill it, so just make sure the entire surface is covered and it’s pleasing to the eye. If you want, you could put a piece on crooked. It’s very important that your fabric is pressed and flat. Now we need to frame each piece of art. I’m going to use fabric that is high contrast to the artwork. Start with a 3½” strip and fold it lengthwise so that the wrong sides are touching, because you are going to need the right side out. Stitch it together with a quarter-inch seam, then go to the iron and press it open and flat, centering it on the back, because this is the side that is going to frame the artwork. You need to make strips long enough to go all the way around each individual piece of art. Now all my framing material is done. I just need to frame the artwork. Place the seam side over top of the seams, even if they are overlapping, and then just tuck it inside. You’re going to go along and you’re going to frame every single one of these, overlapping and then laying them out. When you place your strips down, some of the corners are on the top so they are going to need to be mitered. It’s very easy to miter. Mark your corner, take it to the iron. Let me show you. To do a mitered corner, mark where you want your corner to be. Take your piece to the iron. I like to just pin it onto the ironing board. Pin that corner where you want that point to be to the ironing board. When you pull up the fabric you can see that it already wants to do that 45° angle. Keeping your fabric straight you can pin it in again. Then with your hand you’re going to mark your 45° then press it with an iron. Once it’s pressed you can take the pins out and you have it all ready there to put on top of your quilt. Place down all of your frames. You don’t have to frame the outside because that is going to be done last. Make sure there are no raw edges showing so everything is tucked in. Now we have to attach all of these pieces together. The easiest way is to baste it with a basting glue. This is a temporary basting glue so it will come out in the wash, but it will hold the layers together until I can get to sew it. If you don’t want to use a basting glue you will need to pin your borders down on both sides all the way around. To glue it you’re just going to run a little bit of glue on each side of where the raw seams are going to be. You don’t need to worry about the one over here because that’s going to be trimmed off when all of this is dry. Just do a couple of dollops of glue on both sides and lay your frame back down. Make sure you let it get good and dry because you’re going to want to pick up this entire thing in one piece. Once the glue has all dried, then you need to take this to the machine and sew each of these borders down. Put some pins in the heavier places and a few places all over, just to hold it in, then go to the machine and stitch down on the sides of each of these frames, not going into the fabric, just stitching as close as you can to the edgesof the frame. So the frames are all stitched down and it’s now one big piece of fabric. If you flip it over you will be able to cut off the extra fabric that hung over when you overlapped things. You can cut off that fabric— be careful not to cut the front, though. Once all the pieces have been cut, take it to the iron and give it a good press so it’s nice and flat because now you’re going to square it up. Once you finish squaring it up, we need to put a border on it. I’m going to start with 4″, but you can choose whatever size border you want. You need to take that 4″ border and sew it onto all four sides. The 4″ border is on and the seams have been pressed out towards the border. That will save bulk being in these areas. If you want, you can leave it this way, but I want to maintain the consistency of these frames so I’ve made enough frame to go all the way around. And you will put the border all the way around, mitering each corner just as you did inside the quilt. Let me show you how to join the two seams together. So I’ve gone all the way around and now I need to join these two. Take one edge and tuck it in ¼”, even a little bit more than ¼”, and just press it with your fingers. Then you will make this piece just a little bit longer and you’re going to tuck it in. If you have a pair of tweezers they’re kind of handy. When it’s all tucked in you will be able to sew it right down as you go all the way around. The frame has been put on and stitched all the way along the edges and it’s done. It just needs to be sandwiched and quilted. Now when you quilt this, quilt each block Individually and do not quilt the frames. The frames will pop up and this will look like its own individual artwork on a wall. My art collage is done. Quick, fast, easy, and what’s really nice about it, I get to use those big pieces of fabric that I just didn’t want to cut into. And, it was very little sewing so this can be done in a day. It just needs to be now sandwiched and quilted. I’ll put a link in the description from the fabric line-up from Timeless Treasures and as always Thank you for joining me today on SewVeryEasy. Feel free to subscribe and, as always, come on back and let’s see what we’re sewing next time
in the sewing room. Bye for now!

40 thoughts on “Modern Collage Art Quilt

  1. This is a very different approach – I like to lay things out so I can see if I like it – perfect! Thank you for the inspiration.

  2. Your ideas are so unique!  Please share once you get this quilted.  I would love to see it!  I always look forward to your videos.

  3. Excellent demonstration and a great idea. Thank-you for sharing your creativeness – it's a wonderful motivator.

  4. Hi Laura, I've been holding on to a beautiful panel for so long because I couldn't bear to cut it up.  I really like this project that will allow me to use it and have a beautiful quilt as well.  Thanks for another great idea.

  5. HI Teacher thanks for the One of a kind quilt. I'm going to do this for my grandson bed. But one thing(s) I need your help with is how did you do  the red 4 inch border to the quit (added to the quilt). If you can send me the video(s) on how to add a border. Thanks and take care:=)

  6. Looks so easy. I have been hanging on to some of my Rose fabric. I was never wanted to use Now I can. Thank you for showing this video. Will keep in my favorites.

  7. The most difficult part is what comes next.  Did you ever finish this lovely quilt?  I would love to see it .

  8. Genius! I knew that I would know when I found the quilt that I wanted to make. I've been stuck for 3 days. Thank you so much for this tutorial…. 😁😄😃😉😅🙆😊😄😁😂 Happy Happy Joy Joy…

  9. Hi Laura, I noticed you glue the fabric together and waited until the glue dryed. You don´t have to wait, if you iron on top of the fabric, the glue will dry at once. try it on some scrap first so you get the feeling 🙂
    Love your videos, thank you. Greetings from Denmark

  10. How did you connect the corners on the outside red border? It looks mitered but I see tags sticking out from underneath. 😀

  11. Beautiful-Love it! Definitely making this one! Seems easy enough. That is what I like-The Easy Quilts! Thanks so much for showing us!

  12. amazing, love your channel and ideas. Always interesting, up to date, innovative. Some people have it all – looks, personality and talent. And thats you ! 🙂

  13. Just found this video, I have two pieces of fabric that is hard for me to cut, it’s Butterfly Grotto, from Timeless Treasures the butterflies, and floral and greenery seems to come to life, this is a really great option; brilliant, thank you for sharing.

  14. ohhh, I want to see the finished bound quilt! Do you have it posted on line anywhere? I want to make something similar as an wall hanging for my living room.

  15. Love it! Sew very easy! I am sure I will make one of these! Love your videos, easy to follow and always a great presentation and explanation to follow!

  16. Any hints on how to sew the edges of the frames down? If I put the needle in the center, the pressure foot is half on and half off. If I move the needle to one side, it's hard to see to keep the fabric going straight and smooth. Maybe a 5 minute video, please? 💝☀🌵

Leave a Reply

Your email address will not be published. Required fields are marked *