Paint a Wall to Look like Brick & Tile | Paint Techniques

Paint a Wall to Look like Brick & Tile | Paint Techniques


Welcome to the full finish segment on tile
and brick. The first thing I wanted to show you, was
this sample, which is of brick which is trying to simulate plaster that has been falling
off brickwork, and you’re exposing basically the brick. But also keeping in mind that you have the
plaster, which is really the original covering of the wall. So this, I think, initially we’ve started
off with doing the grout line in kind of that browny-gray, and then taping it off into the
brick segments, and then using glazes, to color it to look like brick. And then after that, applying a regular plaster
and then glazing that. So, that’s how this look was achieved. This is kind of like a stone tile, which again,
is something that we started off with a creamy background, used a very, very thin tape to
mask off the grout lines, and then applied a textured paint, and then glazes. So, this was how this sample was achieved. And a kitchen tile look, which is in green
and yellow, which does look like it’s been fired in a kiln and that it’s a very beautifully
glazed tile, which also has a crackle over varnish on. That is something that was done in a kitchen.

7 thoughts on “Paint a Wall to Look like Brick & Tile | Paint Techniques

Leave a Reply

Your email address will not be published. Required fields are marked *