Simple Home Decor DIY Ideas To Try

(uplifting music) – [Tresha] Hey, guys,
welcome back to the channel. It’s Tresha, and I
wanted to share a couple of DIY ideas with you, and
they are pretty simple to do. Let’s get started, and be sure to like and share with others. The first project is a
Dollar Tree rustic lantern. You will need to purchase
two of these wall sconces that I found from the Dollar Tree. First, I turned over the sconces. Next, I removed the screw at the top, and you will need a
mini flathead for this, which you can also find
at the Dollar Tree. Afterwards, I placed E6000
around the edge of the lantern. E6000 is a glue that I like, but you can use any glue that you prefer. Next, I placed the other sconce on top. And make sure the sconces are aligned. While the glued dried, I used
a couple of pieces of tape, just to keep it together, and removed the tape once it was dry. The second project is a Dollar
Tree floating candle holder. For this project, you
will need one silver tray and a square glass container which you can find at the Dollar Tree. First, I flipped over the silver tray and then added E6000 to the top of it. Next, I placed the
square container on top. I let it dry for 24 hours,
and then I flipped it over. And now I have a beautiful
floating candle holder. The next project is a Hobby
Lobby Chanel flower vase. For this project, you will
need a square glass vase, and I found this at Hobby Lobby. Also, you will need some pretty flowers. I found these at Hobby Lobby. I want it to look like
the vase had real water, so I got this Acrylic Water Kit. The first thing I did
was do a Google search to find the No. 5 Chanel label. Once I found it, I just
downloaded it to my PC and printed it out on card stock paper. Next, I just cut out the
Chanel label using my scissors. Next, you want to flip over your label and add some type of adhesive to the back. In my case, I used Glue Dots, but you can also use double-sided tape. Next, I attached the label
to the glass container. In the Acrylic Water Kit, you get a bottle of curing agent and a bottle of epoxy resin. You also get a clear tray
and a popsicle stick. I poured both bottles into the tray, then used the popsicle stick to stir it up until it became very clear. Afterwards, I just poured the
acrylic mix into the vase, and I made sure to not get
the acrylic on the side. I wanted to make sure my
flowers stayed in place while the acrylic cured, so I placed pieces of tape
on the top of the vase and then placed my flowers in. Thanks, guys, for watching. If you liked this video
and would like to see more, please give it a thumbs up and subscribe. It’s free. Also, let’s connect on Instagram. I’m @DesignsByTresha. I would love to share
your work, so tag me. And I’m on Facebook now @ImTreshaJA, where I give commentary on my videos and share other ideas with you.

Leave a Reply

Your email address will not be published. Required fields are marked *