Spray painting a cinder block wall.

Spray painting a cinder block wall.


In this video by ABN painting shows preparation work and spray painting a block wall that goes around the back of the house and this is is the look of the wall before we started first we move the gravel a few inches away from the wall so it doesn’t get any overspray pressure washing is next after the wall had the time to dry we do all the masking on one side of the wall where it meets the house we cover the house with 12-inch masking paper and green tape on the other side we cover the edges of the gates with masking paper and then the rest of the gates using tarps we cover the satellite dish a plant and we also put the tarp under the sprayer with all the paint buckets so there’s any spills or drips they’ll end up on a tarp and not on a gravel usually all edges of the wall that are being shared with a neighbor will mask using painters tape but in this subdivision all walls are the same color so we don’t need to worry about masking the edges there are a few places on this wall where the paint is missing and before painting the wall we’re going to prime those areas using a masonry primer after we’re finished with priming we change the primer for the paint in the spray gun and will start applying the first coat of paint after we finished with the first coat we go back and apply the second coat of paint after we’re done with painting we move the gravel back a remove paper and tape and after we finished this a look of the wall

2 thoughts on “Spray painting a cinder block wall.

Leave a Reply

Your email address will not be published. Required fields are marked *