– Welcome to Mother Daughter Projects. I’m Steph. Today we are gonna take you into a room that we’ve never fully explored in a video. Right behind this door is my LEGO room. Yes, I’m an adult, and I have a LEGO room for me….

– Plumberparts.co.uk. “Honest reviews and advice”. Hold tight and welcome to today’s plumberparts.co.uk video. Today I’m gonna tell you how to fit and instal a basin on a pedestal. This can be quite difficult to do. But if you go about it in the right…

Hi, Steve from PartSelect. Today, we are gong to show you how to change the drum support roller on your dryer. It is a pretty easy job. All you need is these tools. A putty knife, a 5/16” snap driver and a pair of E-ring…

Hi it’s Steve from PartSelect. Today we’re going to show you how to change the drum glide on your dryer. It’s a really easy job. All we need is a putty knife and a 5/16th nut driver. Let me show you how it’s done. Very…

Hi, it’s Steve from Partselect. You’ve decided to change the high limit kit on your dryer. It’s a pretty easy job. You’ll need a putty knife, a quarter inch nut driver, and you possibly might need a pair of needle nose pliers. Let me show…

Hi! It’s Steve from PartSelect. Today, we are going to show you how to change the Ice door kit on your refrigerator and it’s a really easy job. All we are going to need is a petty knife, a pair of needle nose pliers and…

Hey, what’s up, everybody? I’m Justin with AmericanMuscle.com, and this is my detailed review and install of the Gibson 4-inch Metal Mulisha Cat-Back, available for your 2015 and newer 5-liter-powered F150. Expect a relatively mundane one out of three wrenches on the difficulty meter on…

In this video I’m going to show you how to repair a hole in the wall You can pick up pieces slightly bigger than this from the hardware store for $8 or $9 Gonna need to figure out what size patch to make So we’ll…

Steve: Hi, it’s Steve from PartSelect. You’ve determined to drive motor on your dryer has failed. We’re going to show you how to change it. All you’re going to need is a putty knife, an adjustable wrench, a pair of slip joint pliers, a large…

“Hi, it’s Steve from PartSelect decided to change the drum rollers on your dryer. It’s a pretty easy job, all we’re going to need is a putty knife, Philips screwdriver, and a 5/16 nut driver. Let me show you how easy it is. Very first…