I started this project by breaking down the White Oak boards I used for the shelves on the bookshelf. I picked up this 4/4 White Oak from my local lumber dealer Asheville Hardware, and luckily it was already S3S, or surfaced on three sides. This…

93826-2 139511 151957 215116 225146 225214 226815 227010 230928 230942 238535 247919 247957

Sand all surface of the tray KL0013 by sandpaper. Paint the tray with white acrylic paint C0200. Apply a Spray adhesive CAD9721 onto the stencil K182 and fix it to surface. Apply the texture paste 704444 using the stencil. Remove the stencil. Cut an image…

Sand all surface of the tray KL0013 by sandpaper. Paint the tray with white acrylic paint C0200. Apply a Spray adhesive CAD9721 onto the stencil K182 and fix it to surface. Apply the texture paste 704444 using the stencil. Remove the stencil. Cut an image…

Peace, mercy and blessings of God, hello everyone how you doing today i will show you how to make A putty filler for any gypsum board designs first what stuff you need to do it second what kind of putty filler you gonna use bring…

Today we’re going to talk about how to install a DIGNITET, I believe that’s how you pronounce it, curtain wire hanger that we recently purchased at IKEA. We also got a third bracket to allow us to run a longer span of the wire. We’re…

what we run workshop I’m Dave this is our shop today we’re showing you guys how to build a custom cowboy hat rack you this some of you guys may have a few days later on the house and when I display them personally I…

Today we’re gonna make a modern wood and acrylic photo stand With the help of the HP ENVY Photo 7855 printer You did that really good! Thank you Evan and I both paint, so our walls are covered in art It’s not a bad problem…

Hi guys, welcome to TECHYDIY. My name is Nigel and today I am going to build an infinity mirror with a modern style. The design works really well as a table lamp. It’s powered by a safe low-voltage power supply. It uses LED lights and…

hello, last time I showed you how you work with the window puller and today I’ll show you that too but with a different picture. I have taken an old canvas, have mine there Glue on it, the protection rescue blanket stuck on it and…